Center Display Shelf Smart Button Storage Box for Tesla Model 3/Y

Evgoxmods Product parameters
Product model: T-006A Intelligent physical button storage box
T-006B Intelligent physical button storage box
Applicable models: Suitable for Tesla Mode 3/Y
Power supply interface: Type-C interface
Input parameters: 5V1A
Battery model: One standard flat head 18650 battery
Product size: 307mmX 175mx 240mm
Product material: ABS+PC+TPE+hardware
Installation method: display beam plug-in installation

Instructions for use of smart button storage box
1. The buttons can quickly control the corresponding function information of the original car.
2. There is a built-in 18650 battery (not included) to power the button system. When the battery is out of power, you need to connect the power supply to charge the battery. The power can be charged from the charging port of the armrest box or the charging port of the docking station installed, or you can As a power supply method.
3. When the buttons appear insensitive or inactive, the battery may be low. Please charge it in time. The indicator light will show red during charging. When it is fully charged, the indicator light will go out and it is fully charged.
4. The storage box can be used to store mobile phones, cards, ETC temporary cards and other items to expand storage space.
5. ETC equipment can be placed. There is a magnetic suction function on the top. Stick the magnet sheet on the bottom of the ETC box and place it in the magnetic suction area.
6. When you need to upgrade the firmware, for Android systems, scan the QR code to download the software. For iOS systems, directly search "Special Ball" in the app store to download the software, click Firmware Upgrade, and wait until the upgrade prompt is completed. (Note that no upgrade is required under normal use)

Standard packaging:

storage box*
instruction manual*1
silicone pad*1
ETC magnetic piece*1
adapter cable*1
controller*1

Installation Precautions:

1. Be sure to open a car door before installation

2. When installing the protocol box (black connector), be sure to connect the interface in place, otherwise the car may have tire pressure alarms, inability to shift into gear, and other alarm messages; this will result in the car door not being able to be opened, and the APP not being able to be opened. The card key cannot be opened either. If this happens, please contact your local Tesla official service How to avoid the above situation: 1. After installation, check the original car screen to see if there is a yellow alarm prompt. 2. If you encounter a yellow alarm prompt, it means that the interface is not connected properly. Please disassemble and install it again, and then check again whether there is a yellow alarm prompt.